Contact Person: Ms.Cherry Chan

Tel :+86-769-22780950
Fax : +86-769-22780951 
Mobile phone:+8615818381701


You are here:Home >> Iron Melting Induction Metling Furnace

Product name:Iron Melting Induction Metling Furnace
Update time:2016.04.11
Heating Material: steel,iron,stainless steel,silver,gold,aluminum,brass,zinc,etc.
Material Shape: bar,steel rod,billet,gear,shaft,tungsten steel,pipe,flat,pot,etc

Product Details:

Iron Melting Induction Melting Furnace

The medium frequency induction furnace apply to iron and steel, copper, Ceruse, aluminum, zinc, nickel, gold and silver and other metal melting, heating, insulation, and forging, sintering, hot rolling, bending forming pre-heat treatment. Is mainly used in melting foundry industry.

Equipment Main Features
1, Using a zero-voltage scanning soft-start mode, in any case may at any time to start or stop, will not have impact on power supply.
2, Rapid melting, the production cost is low; Pollution is small, comply with environmental requirements;
3, A direct effect from the cold furnace melting. Dissolved material will be fully dumped clean. Molten material easy to replace.
4, Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5, Furnace shell using cast aluminum or steel structure, small footprint; Furnace flip dump convenience, according to the need to use electric, manual, hydraulic tilting furnace and other means.
6, Designed to automatically adjust angle of inverter circuit that can automatically adjust the load impedance match, without adjustment of capacitance compensation and always run the equipment in good working condition; Power supply system diagnostic error function, easy maintenance.

MF Melting furnace Range of molten iron capacity Ton 0.1~0.15
Max working temperature 1650
Melting rate ton/h 0.1~0.15
Cooling water Rate of flow ton/h 15
Pressure Mpa 0.2
water inflow temperature 40
Temperature rise 20
Induction heater voltage V 750
Induction inner diameter mm 360
Induction heater total height mm 500
Turndown method mechanical drive
MF Induction heating machine Range of power kw 100
Incoming line voltage V 380
Max incoming line current A 160
rectifier pulse number pulse 6
cooling water rate of flow ton/h 50
pressure Mpa 0.1
water inflow temperature 35
Temperature rise 15
MF voltage V 750
MF frequency HZ 1000

Home| About Us| Products| Application| News| Video| Contact Us

GUANGYUAN TECHNOLOGY (HK) ELECTRONICS CO., LIMITED   Copyright: Tianxun network   Back-stage management Contact person: Ms.Cherry Chan  Mobile phone: +8615818381701  Phone: +86-769-22780950   URL:     Address:BaJiaoWo Community,WanJiang District,DongGuanCity,523042 GuangDong, China